|
BendArc Bender ~ 6"
Radius (for 7/8"tube)
or 8" Radius (for 1"tube) |
|
Also Available in 10"Radius and 12"Radius, and
for Square Tubing (call)
CONTACT |
BENDARC Workbench Or Wall Mount
Set-up For ROUND Tubing |
FEATURES:
Mounts solidly to a workbench
or wall,
and is constructed of steel boiler plate
and the toughest polymers available.
It comes with
a graduated scale generated by a computer that
eliminates the guesswork and results in no wasted
materials,
the bends are right the first time.
Merely mark your bends,
insert and clamp the piece
into the BendArc and then create the
bend with
the roller, using the long handles leverage advantage
to give you precise control of the degree of bend.
This machine is strong enough to bend
either aluminum or stainless steel Round-tubing.
(Also 1-1/4"Round Or
1"Square Special Order)
Bend tubing without marring or
kinking,
with the right equipment.
Avoid waste material.
Call For Current Pricing |
Part #8378
As Above, but for 7/8"OD-Tube
BENDARC For 7/8"OD-Tubing
6"Radius for Round 7/8"OD |
Part #8378
BENDARC For 7/8"OD-Tubing:
Call For Current Pricing
|
Part #8382
As Above, but for 1"OD-Tube
BENDARC For 1"OD-Tubing
8"Radius for Round 1"OD |
Part #8382
BENDARC For 1"OD-Tubing:
Call For Current Pricing
|
|
BendArc ~
Switch-KIT For Square-1"-Tube
(Below ~ USE With Above Machines) |
Use With BENDARC #8382 (Above)
~ NOT Included (Purchase Separately) ~
Part #8370 KIT For SQUARE
1" Tubing |
BendArc Switch Kit
for SQUARE 1"-Tube
Can use *1"Square Milliken or Steel-Stitch
Tubing too.
(*What Is Used To Make Block-Buster Store
type Signs)SET of Strong Polymer replacement Dies,
to allow the BendArc Tool to cleanly and neatly
bend Square Tubing.
Part #8370
Square-DIE-Set
NOTE: Only Includes
The Polymer DIE-Set;
Does NOT Include the BendArc Machine |
Part #8370
Square-DIE-Set:
(As Pictured On Left)
Call For Current Pricing
|
|
Crown-Arc Marine Tube Bender
~ Tubing Crowner
(BELOW) |
|
Part #8380
CrownArc Tubing CROWNER
Gear Driven Tubing Crowner
Gives Smooth Consistent Crowns |
Crown-Arc Marine Tube Bender/CROWNER
Gear Driven Tubing Crowner
Gives Smooth Consistent Crowns
Both lower rollers on the CrownArc turn and thus
you have better control over the feed and
curve
imparted. It also allows a bigger bite to give
more crown per pass.Use is
simple, insert the bow,
and tighten the knurled knob about 3/4
of a turn,
then crank it through. If you
wish more arc, then
tighten some more and crank the
bow through again.
Will give beautiful smooth consistent
crowns,
no sharp edges or awkward kinks,
to
round stainless steel or aluminum tubing
in sizes from 3/4" up to 1". (Also
1-1/4" Special Order)
The 1" rollers will work properly with
smaller sizes too. |
|
To View 100's Of Related
Choices, Click HERE:
Gallery
INDEX Menu
~ Only
First-QUALITY, Professional-GRADE Products ~
~ Our Promise:
NO Knock-Offs, NO
Seconds, NO End-Runs, NO Refurbished...
Buy with
confidence ~
HOW TO PLACE
YOUR ORDER Here:
1. Select
The ITEM Wanted & Then Click "Add To Cart"
2. Place
QUANTITY, & Click UPDATE (See Minimums, If
Applicable)
Select "Check-Out", Or "Continue Shopping"
~ It Will Remember What You
Have Already Selected Until Done ~
3. Once Done Shopping,
Select "View Cart" and "Check Out"
It's
That Easy... Thanks! ~ Need
Help...? Call (610) 767-7555
These Items Can
Ship Within USA Or Within Canada (based on your location)
SHIPPING/Handling:
Based on actual Combined-Items in Order...
We Ship To USA-48 and to CANADA...
ALASKA,
HAWAII & US-Territories should E-mail or Call first with order
details,
to determine shipping costs and available methods.
Most US-48 Orders
ship via UPS-Ground or Equivalent...
Most Canadian Orders
ship via Purolator (from within Canada, unless otherwise noted in
listing page)...
Any Special-Shipping Requests, if available, are additional...
If you have any questions, always feel confident to call (610) 767-7555
Dave ...All Sales Final...
Fast
Service ~ Need It Quick...?
Call: (610) 767-7555 Daily
Over 10,000 Items
In-Stock Daily...
If You Don't See It, Please Ask Or Call
E-mail:
Dave@cscTextiles.com
*
Low Prices... **
SUBJECT TO AVAILABILITY: Thanks for your interest in
our services and products...
We are an active Distribution company
and manufacturer with well over two-decades of experience,
since
1979... On rare occasion, a specific item, color or pattern may be
on temporary-backorder
due to the volume of companies our distribution
center supply on an hourly basis, nationally...
If such a
situation occurs, I will immediately apprize you of the situation
and your options,
to include a Full-Refund, as soon as I become aware
of it...
Most items usually Ship within 1 to 7 Business Days
(Monday to Friday, except Holidays)...
Due to the nature and
sensitivity of the Online System and Our Business Services,
if you are not in complete agreement with this possibility, please Do
Not order these items...
We will always make every
effort humanly-possible to assure that you receive
your items
accurately and as quickly as realistically possible otherwise, and keep
you updated;
All Sales Are Final...
Thanks for your confidence,
interest and understanding... Dave (610) 767-7555
CSC Textiles
... |
