Grommet Pro TOOLS,
DIES, & CUTTERS Many More Choices
! Get Exactly What You Need. . .
GROMMET
SIZING CHART:
Size-Number
= HOLE-Diameter
SIZE #00=3/16"Hole-Diameter#0=1/4"Hole #1=9/32"Hole #2=3/8"Hole<<Most Popular#3=7/16"Hole #4=1/2"Hole
#5=5/8"Hole
Available By Phone: #6=3/4"Hole
#7=29/32"Hole #8=13/16"Hole Osborne-series
(Standard sizing) ~ Cruiser-series (Euro/Metric
sizing) These
Items Ship from USA Or Canada (Based on Your location) [ Prev
] < PRO TOOLS > [ Next
] ~ Scroll Down ~
Osborne PLAIN GROMMET Hand Setting
DIES Each set consists of
two parts, the punch and the die. Note that the spur and the plain dies are Not interchangeable,
you must have the specified die for each type and Grommet
Size. Never strike a cutter or die with a metal
hammer. Always use a Rubber or Composite mallet for hole
punching or setting grommets or fasteners. A steel hammer
strike such a severe blow that the metal in the dies absorb the
entire shock and begin to crystallize. This crystallization
begins to weaken the dies, which will become brittle and fail
prematurely. #J-For
Osborne PLAIN-Grommet Hand-Setting Dies
#5020
Sz#00 PLAIN DIE Osborne
#5034
Sz#0 PLAIN DIE Osborne
#5021
Sz#1 PLAIN DIE Osborne
#5022
Sz#2 PLAIN DIE Osborne
#5023
Sz#3 PLAIN DIE Osborne
Osborne
SPUR-GROMMET Hand Setting DIES Each set consists of
two parts, the punch and the die. Grommet setting tools for
the Osborne Spur grommets. These require special dies as
setting teeth on the spur washer uses a slightly different size
and die face from the plain and must ensure the spur teeth fit
into the rolled rim for maximum strength. Note that the spur
and the plain dies are not interchangeable, you must have the
specified die for each type. Never strike a cutter or die with a
metal hammer. Always use a Rubber or Composite mallet for
hole-punching or setting grommets or fasteners. A steel hammer
strike such a severe blow that the metal in the dies absorbs the
entire shock and begins to crystallize. This crystallization
begins to weaken the dies, which will become brittle and fail
prematurely.
#J-For
Osborne SPUR Hand-Setting DIES
#5019
Sz#0 SPUR DIE Osborne
NOT
FOR Osborne-PLAIN Grommets See Other DIES (Above)
HOLE-CUTTING PAD
(Hole-Cutter
Sold Separately) For
maximum life of your cutters and die setting equipment, always use
a rubber mallet and not a steel hammer to set fasteners, grommets
or to hole punch. Use this pad under the material you are
punching. The special surface absorbs the impact and allows
the cutter to cut the material, not the bench underneath. Cutters
stay sharper and last longer. #J-6120
Cutting-PAD only Select "ADD To
CART"... Type
QUANTITY & Update
#J-6120
PAD Only ~ Each
HOLE-CUTTING PAD Only
(Does NOT Include
Hole-Cutter Shown)
HOW TO PLACE
YOUR ORDER Here: These
Items Ship from USA Or Canada (Based on Your location)
1. Select
The ITEM Wanted & Then Click "Add To Cart"
2. Place
QUANTITY, & Click UPDATE (See Minimums, If
Applicable)
Select "Check-Out", Or "Continue Shopping"
~ It Will Remember What You
Have Already Selected Until Done ~
3. Once Done Shopping,
Select "View Cart" and "Check Out"
It's
That Easy... Thanks! ~ Need
Help...? Call (610) 767-7555
All
Sales Are Final...
SHIPPING/Handling:
Based on actual Combined-Items in Order...
We Ship To USA-48 and to CANADA... ALASKA,
HAWAII & US-Territories should E-mail or Call first with order
details, to determine shipping costs and available methods.
Most US-48 Orders
ship via UPS-Ground or Equivalent...
Most Canadian Orders
ship via Purolator (from within Canada, unless otherwise noted in
listing page)...
Any Special-Shipping Requests, if available, are additional...
If you have any questions, always feel confident to call (610) 767-7555
Dave
Need
Help Ordering...?
Call: (610) 767-7555 Daily
*
Low Prices... ** SUBJECT TO
AVAILABILITY: Thanks for your interest in our services
and products... We are an active Distribution company and
manufacturer with well over two-decades of experience, since
1979... On rare occasion, a specific item, color or pattern may be
on temporary-backorder due to the volume of companies our distribution
center supply on an hourly basis, nationally... If such a
situation occurs, I will immediately apprize you of the situation
and your options, to include a Full-Refund, as soon as I become aware
of it... Most items usually Ship within 1 to 7 Business Days
(Monday to Friday, except Holidays)... Due to the nature and
sensitivity of the Online System and Our Business Services,
if you are not in complete agreement with this possibility, please Do
Not order these items... We will always make every
effort humanly-possible to assure that you receive your items
accurately and as quickly as realistically possible otherwise, and keep
you updated; All Sales Are Final... Thanks for your confidence,
interest and understanding... Dave (610) 767-7555 CSC
Textiles...
