HIGH PERFORMANCE Awning, Upholstery, & Marine SUPPLY

[ Prev ]  < PRO TOOLS  >  [ Next ]

Professional Production Tools ~          FOAM CUTTERS & Blades         (More below...  Scroll Down)

CSC (610) 767-7555

 Professional Production FOAM CUTTERS

8" ACU-CUTTER FOAM CUTTER ~ Affordable, Efficient 8" Foam Cutter
This is the ideal foam cutter for the smaller shop.  It cuts with two blades,
 one oscillating and one stationary.  It has a 8" stanchion as standard and
 the blade and guide are included with the unit.  The heavy duty free standing
 base is 4 inches wide and 6 3/4 inches long and mounted on glide bearings
 to reduce drag. 
110v Foam Cutter
Please note that while this unit is an outstanding value, it is not intended for a
 production line where foam cutting is the only job performed for the whole day.

  Foam Cutter  ~  8" ACU-CUTTER Queen FOAM Cutter 
 8" Queen Foam Cutter. 
Stock
#4338 Foam Cutter  Each

 Special $429. Ea
EACH
  Replacement BLADE-Set  (For Above #4338  ~  8" ACU-CUTTER) 
REPLACEMENT BLADE SET
For 8" Queen Foam Cutter,  Described Above.
 
This set includes both the stationary and the oscillating blade,
plus replacement rolled pins for locating the blades in the cutter.
  Stock #4336 BLADES (TWO-BLADE Set)
$59.95 Set
EACH-Set BLADES
Replacement BLADE Set
Replacement
BLADE Set
Select  "ADD To CART"...   Type QUANTITY & Update
MANUAL FOAM CUTTER  ~                               ~ BOSCH Cutter/Parts below  (Scroll Down)
  Manual   ~    410-U-CUT FOAM CUTTER     Length: 46"   Width: 17"
LARGE SHEET FOAM CUTTER ~
This versatile cutter will cut as fine as 1/4" to

 a maximum of 9" and up to a width of 36" with unlimited length.  It allows you to glue
 salvageable foam pieces together and minimize waste.  Replacement Blades below.
#4341 U-Cut   Each
  Special  $199.95 Each
Each FOAM CUTTER
410 U-CUT FOAM Cutter ~ CSC (610) 767-7555
Length: 46"   Width: 17"
FOAM Cutter
 Blade  ~  REPLACEMENT BLADE For 410-U-Cut above
Normally these blades are very Long-Lived as they are cutting through softer substances.

  Easy Installation.   #4342 Replacement Blade  Each
$39.95 Ea
Each
Replacement BLADE For 410 U-Cut
410 U-Cut Replacement BLADE
~  BOSCH Foam Cutter ~ (below)
 Bosch ~ 8" GUIDE For Bosch Foam Cutter (Below)
For Foam Cutter Below...   
#4346  Guide Eight-Inch     Each
$145. Ea
Each  8" Guide
00006578.jpg
8" GUIDE Bosch

 Bosch  ~  8"-BLADE For BOSCH CUTTER #4343
#4344    8"-Blade     Two-Blade SET (Also See 8" GUIDE Above)

$69. Set
EACH
8" Blade-Set

BLADES For BOSCH
Bosch 8" Blade

Select  "ADD To CART"...   Type QUANTITY & Update
  BOSCH FOAM CUTTER  MOTOR  UNIT w/Footplate 00006535.jpg
This is the Bosch model 1575 Foam Rubber Cutter unit.   It is heavy duty, fast oscillating unit that employs two moving blades within a narrow, tapered guide to cut foam quickly and easily. The blade and guide combinations, which must be ordered separately (Not Included), are available in eight or twelve inch combinations.  This versatile unit was designed to speed cutting and of service in mind. Changing blades requires no tools, it will cut all types of foam and carpeting, and has a slim motor housing that will fit even the smallest hand.  It is double insulated, UL listed and complies to OSHA regulations.  It weighs 3.5 pounds, is 9 1/4" long and runs at a no load speed of 3200 strokes/minute. The base has rollers for minimum rolling resistance.   Has a one year manufacturer warranty.  FOOTPLATE Included.

 Order Blade & Guide Separately;  See  8" (See Above)  OR  12" (See below).
 
Stock #
4343 BOSCH Motor Unit 115v
 
 Special $989. Each
BOSCH MOTOR Unit 115v w/FOOTPLATE
 
                     Order Blades/Guides as needed...

BOSCH

FOAM CUTTER

MOTOR

UNIT

00006535.jpg
BOSCH
Professional

 

 Bosch  ~  12-inch-BLADE For Bosch Cutter #4343
#
4345   12"-Blade     Two-Blade SET
$69. Set
Blade-SET  12" Blade


 Bosch  ~  12"-GUIDE For Bosch Cutter
#4343
Also
SEE 12"-BLADE Above.

#
4347   12"-Guide      Each

$159. Ea
EACH  12" Guide
BLADES For BOSCH
Bosch 12" Blade

 

00006562.jpg
Bosch 12" GUIDE

Select  "ADD To CART"...   Type QUANTITY & Update
  [ Prev< PRO TOOLS  >  [ Next ]
 
Blade Power Cutters    WEBBING Heat Cutters    FOAM Power CUTTERS   BINDERS ~ Folds Binding
ENGEL Hot Knife & Blades   
FOAM Manual CUTTER

Quick INDEX ~ Find It Fast
<   FASTENERS & FITTINGS    >
 [ DOT-DURABLE ]  [ LIFT-The-DOT & Tools ]  [ PULL-The-DOT ]  
  [ Dot-Durable DIE Tools ]  [ MOLDING CLIPS ]  [ GROMMETS ]  
  [ Top VENTS ~ POLES ]  [ QUICK-FIT Kits ]  [ Bimini FRAMES ]  
 FITTINGS: [ NYLON ] [ STAINLESS ] [ CHROME ] [ ALUMINUM ] [ TOOLS ]

BACK To CSC INDEX

HOW TO PLACE YOUR ORDER Here:
These Items Ship from USA Or Canada (Based on Your location)
1.    Select The ITEM Wanted  &  Then Click "Add To Cart"
2.    Place QUANTITY,   & Click UPDATE  (See Minimums, If Applicable)
       Select "Check-Out", Or "Continue Shopping"
        ~ It Will Remember What You Have Already Selected Until Done ~
3.    Once Done Shopping, Select "View Cart" and "Check Out"

SHIPPING/Handling:
Based on actual Combined-Items in Order...
Currently,  We Ship within USA and within CANADA only...


Most USA-48 Orders ship via UPS/FedEx-Ground or Equivalent (from within USA distribution centers)...
ALASKA, HAWAII, Puerto Rico, Virgin Islands & US-Territories should E-mail or Call first with
order details, to determine shipping costs and available methods.


Most CANADA-Province Orders ship via Purolator or Equivalent (from within Canada; No border crossing)...

YUKON, NORTHWEST, NUNAVUT, IQALUIT, Territories, and MARITIME Should E-mail Or Call First

with order details, to determine shipping costs and available methods.

Any Special-Shipping Requests, if available, are additional...

 

All Sales Are Final... 
Thanks for your confidence, interest and understanding... 
Dave /  CSC

 

< < <  THANKS FOR SHOPPING WITH US...!  > > >

 

Awning ~ Marine ~ Upholstery ~ Transportation ~ D I Y ~ Hospitality ~ Recreational ~ Industrial ~ Decor
SUPPLYING  Custom-Designers,  The TRADE, and the Creative DO-IT-YOURSELF  Craftsman
Our Promise:    NO Knock-Offs,  NO Seconds, NO End-Runs, NO Refurbished...   Buy with confidence

 

Copyright  CSC 1999-2017 All Rights Reserved
Designated Trademarks and Brands are the property of their respective owners.

 

A CS CORP Company, USA

CSC ~  Founded by Veterans.