RESIN Boat FITTINGS Colorfast | CSC (610) 767-7555

NYLON Acetyl RESIN ~ Black Or White MARINE

STAINLESS Scroll Down RESIN FITTINGS > [ Next ] Pg 1 of 2
Ideal for sport and recreational craft. For BOATS in Fresh Water

Resin ~ For 7/8"-OD-Tubing ~ Outside EYE END Cap
#J-2541 BLACK OR #2540 WHITE

Delrin Resin ~ Large Deck Hinge
#2580 BLACK OR #2560 WHITE

Delrin Resin ~ ANGLE Base Deck HINGE
#2711 BLACK OR #2710 WHITE

Delrin Resin ~ Angle Base Deck Hinge Large Hole
#2712 BLACK (Only)

> Scroll Down, more below > >

*See Minimums Select COLOR "ADD To CART"... Type QUANTITY & Update

Delrin Resin ~ 3/4" Jaw Slide: For 3/4"-OD-Tubing
#2620 BLACK OR #2610 WHITE

Delrin Resin ~ 7/8" Jaw Slide: For 7/8"-OD-Tubing (Below)
#2600 BLACK OR #2590 WHITE

Delrin Resin ~ 3/4" Tube Connector: For 3/4"-OD-Marine Tubing
#2612 BLACK OR #2611 WHITE

Delrin Resin ~ 7/8" Tube Connector: For 7/8"-OD-Marine Tubing
#2614 BLACK OR #2613 WHITE

Delrin Resin Nylon ~ Pad Eye Straps

#j2640 BLACK OR #j2630 WHITE

Delrin Resin ~ Nylon Head Screw
#j2654 BLACK OR #2j653 WHITE

Delrin Resin ~ 2-Hole Side Mount Plate

#j2661 BLACK OR #j2660 WHITE

> Scroll Down, more below > >

*See Minimums Select COLOR "ADD To CART"... Type QUANTITY & Update

Delrin Resin ~ 2-Hole LASH HOOK

#j2671 BLACK OR #j2670 WHITE

Delrin Resin ~ Channel End Cap
#j2691 BLACK only (No White)

BLACK Only

TRACK / WELT

Resin ~ ONE-Inch Square JAW SLIDE For 1"-OD-Square-Tubing
#j2705 BLACK OR #j2706 WHITE Includes Set-Screw.

Delrin Resin ~ 1"Square Inside Eye End
For 1"-OD-Square-Tubing
#j2708 BLACK OR #j2709 WHITE (Not Shown)

Also In WHITE
(Not Shown)

[ *MINIMUM $30 Order Required + Shipping Cost, On ALL Fittings, combined. ]

BACK To CSC INDEX

STAINLESS More RESIN FITTINGS > [ Next Pg 2 ] Or [ Resin BUCKLES ]
NYLON Acetyl RESIN ~ Black Or White MARINE
Delrin Acetyl Resin compound. Excellent resistance to corrosion of any kind,
plus the fact that the color is cast in, not coated on means that it hides scratches well.
Self lubricating to a degree. It is unaffected by water exposure, and tough enough
that it can be tapped for set screws. These fittings are injection molded under high
pressure to give excellent tolerances in a lightweight,
economical product designed for durability and performance.
Ideal for sport and recreational craft. For BOATS in Fresh Water Lakes.

NOTE: MARINE FITTINGS Are Sized By The Marine-TUBING OUTSIDE Diameter...

SHIPS DOMESTICALLY In USA -or- In Canada (No Border-Crossing Required) ... Ships Domestically.

CSC ~ Founded by Veterans.