FRAME
Replacement PARTS
for ALPHA /
Continental / Sun-Tamer Lateral-Arm Retractable Awnings
^ CLICK IMAGE To View LARGER Above ^
^ ^ Or RIGHT-Click to Open To New-TAB ^
^ #14002 #14003 - Front-BAR
Aluminum #14208 -
Crank-GEAR 7:1 Ratio (for 2 Arms) #14213 -
Large-GEAR 13:1 Ratio (for 2+ Arms)
#14270 Gudgeon - Round-End for Roller tube #14271 Gudgeon -
Gear-End Sq for Roller tube
Reference PART Number:
#14304 - 4ft Hand-Crank #14305 -
5ft #14306 - 6ft
#14307 - 7ft Hand-Crank
#14370 - C-Clamp for Fabric onto Roller #14393 - End-CAP
for Front-Valance-Bar
#15015 - Square-Support-TUBE #15105 -
Lateral-Arm for 5ft3/pr
#15107 - for 7ft/pr #15108 - for 8ft6/pr #15110
or L -
Lateral-Arm for 10ft3/proj
^ ^
#15111 - Arm for 11ft-6inch/projection
^ ^ #15126
or HD - End-Connector for arm
^ ^
#15127-Std Shoulder-Extrusion #15137-LG #15128-Std U-Pitch-Bracket #15138-LG
#15224 - BUSHING PVC for Round-peg side #15302 - CLAMP TOP Piece
#15303 - CLAMP BOTTOM Piece #15394 - END-CAP for Square-tube
#15409 - HOOD Cover Aluminum
...IF You Are Not Sure, feel confident to call...
Purchase (most Parts) Below
*PRICING BELOW... (Verify Number With Image
above)
*NOTE:
These
Parts Are for Alpha Continental
and
may not fit different series or brands...
#15413 - End-CAP for Hood/Black plastic
#15419 - Wall Mount BRACKET #15421 - End-Support-Bracket for Roller
#15497 - Support-BRACKET for Hood
PARTS For
ALPHA / Continental / Sun-Tamer Lateral-Arm Retractable Awning systems...
Be sure of the items, since
all
sales are final. ~
Available in Mill/Silver, White, or Bronze-tone If no color is specified (Or no
longer available), Mill-finish/Silvertone
will be sent.
Note: *These Alpha Parts Ship To USA-Street Addresses Only...
All
PARTS Are Special-Order,
Allow up-to-10-business-days before shipping.
*NOTE:
These
Parts Are for ALPHA / Continental / Sun-Tamer Awnings and
may not fit different brands...
SPECIAL ORDER
ITEMS : All
Sales Final :
CALL BEFORE ORDERING
Front CLAMPS
~ Part #15302 Top & #15303
Bottom (Connects Arm To Front-Bar)
CLAMP Set (Top/Bottom) For attaching Arm to Frontal-Bar.
PER PAIR:
Includes Two-TOPS and Two-BOTTOMS w/Hex-head Screw
Select
Color (if applicable),
Then "ADD To Cart"... Type Quantity & Click Update (For CREDIT CARDS Click
Black and White Button at
Checkout)
Front > > > End-Connector
for Arm :
Attaches to
Front-Clamp from-arm
For attaching Arm-Extrusion to Front-Clamps (above). Per PAIR (2) #15126 w/Pin (See Illustration/Configuration) NOTE:ORDER
STD For
ANY 5'3, 7'0, 8'6 Projection, or 10'3-STD (Extr 60"L / 52"L)
Arms ORDER
HD For
Heavy-Duty 10'3-HD (Extrusions: 59"Long / 50"Long),
or any 11'6 PR
(Extrusions: 68"L / 60"L),
13'0 Arms
End-Support
Bracket
~ for Roller,
Part #15421
(Connects Roller To Square-Tube)
For attaching Roller and Square-Tubes
:
PAIR w/Machine
BOLT + One-Bushing
(plus #15224
Bushing for Round-Peg side)
Note: *These Special-Order Items Ship To USA-Street
Addresses Only...
All
PARTS Are Special-Order,
Allow up-to-10-business-days before shipping.
Select
Color (if applicable),
Then "ADD To Cart"... Type Quantity & Click Update (For CREDIT CARDS Click
Black and White Button at
Checkout)
Roller
END-DRIVE CAPS
For 2-3/4"Inside-Tube
Part #14271
Or #14270
#14270-ROUND-PEG-Side
:
ROUND-Side (Below/Left)
#14271 Drive/Gear-SQUARE-Peg
side (Below/Right)
For
attaching ROLLER-Tube Ends To Gear or Rotation-Side.
Fits
Inside 2-3/4"ID-Tubing : with Square
(1/2"Square)
Drive-Peg >
14271-GEAR-side
w/Square-Gear-Peg: 1.5"L or 2.2"L
> > < <14270
w/15224
ROUND-side w/a PVC-Bushing< EACH Is Different, see Illustration on top page.
(Other
1-7/8"OD Sets Offered below)
BELOW:
END-DRIVE CAPS (SET)
For 2-3/4"ID-Tube
OR
For smaller 1-7/8"Inside-Tube
(Above) SET:
INCLUDES ONE OF EACH-SIDE
#14270-Round-Peg PLUS #14271-Square-Peg (As Above)
...By The SET
(ONE Of Each-Side)...
Manual Crank
GEAR
~ Part #14208-Standard
(Rotates-Fabric-Roller) 7:1-RATIO
STANDARD
7:1 GEAR
For End of Roller
with 1/2"Square-Pegs
<
DEPTH > 7:1
Ratio (most 2 Arm Awnings)
Casing: ~2-1/2"H x ~3-3/4"Depth x ~2-1/8"Facing-Width
(Front-Facing-Width/Thickness
may vary)
> >
GEAR
Note: See RATIO On Your Pre-existing Gear
+ Facing-WIDTH
... Images/Dimensions May Differ
~
= Approximately; H = Height;
D = Depth; W = Width while
Front-Facing
LARGE
13:1 GEAR
For End of Roller with
1/2"Square-Pegs
<
DEPTH > 13:1
Ratio (for HD 2+ Arm Awnings)
Casing: ~3"H x ~4"Depth x ~2-5/8"+Facing-Width
(Front-Facing-Width/Thickness
may vary)
> >
Manual GEAR -
Large 13:1 ratio (Front-Facing-Width/Thickness
vary)
GEAR
Note:
See RATIO On Your Pre-existing Gear + MEASURE Facing-Width
... Image/Design May Differ
All
PARTS Are Special-Order,
Allow up-to-10-business-days before shipping.
SMALL
5:1 GEAR
For smaller Awnings / Windows
< DEPTH > 5:1
RatioCasing: ~2-1/4"Hgt x ~2-5/8"Depth x ~1-1/4"+
Facing-Width/Thickness
(Front-Facing-Width/Thickness
may vary)
> >
HAND
CRANK 4ft #14304 -OR-
5ft #14305
Select A Length, Then Add-To-Cart
: Select 4ft/L or 5ft/L Length
HAND-CRANK / Note:
*Measure From
Your Waist to Gear, to determine Length needed....
Select
Length,
Then "ADD To Cart"... Type Quantity & Update (For CREDIT CARDS Click
Black and White Button at
Checkout)
HAND
CRANK
6ft
#14306 -OR- 7ft #14307
HAND CRANKS For Manual Control of Awning
:
SELECT 6ft/L or 7ft/L ~ Select Length*
END
CAPS For
Frontal-Bar/Valance #14393 (w/Anchors and SS-Screws)
#14393 END-CAPS PVC For
Front-Bar-Val : As noted SET Includes
TWO : PVC-Cap-Black w/ss-Screws + pvc-Anchors
(May Differ From Older-Original Design or
Color.)
>
Note: *All Alpha Parts Ship To USA-Street Addresses Only...
Select
Color (if applicable),
Then "ADD To Cart"... Type Quantity & Click Update
All
PARTS Are Special-Order,
Allow up-to-10-business-days before shipping.
(For CREDIT CARDS Click
Black and White Button at
Checkout)
Wall
BRACKET Part #15419
(Connects Square-Tube to Building)
WALL Mounting BRACKETS Mill Finish (Silver-tone)
:
Bolt & Lock-Nut included (to hold in square tube)...
Includes Two Wall Brackets w/SS-Bolt & Lock-Nut
>
Brackets For Hood onto Cont. Awning: Mill
(Silvertone) w/machine bolt
SHOULDER PITCH BRACKET #15127-Standard
1-1/4"w Or #15137-Large 2"wide
Bracket Mount To Square-Tube
5'3 to 10'3
PR
Mill (Silvertone) w/One-Mounting-Bolt :
*STANDARD
1-1/4"wide
Bracket To Square-Tube
for
11'6 +
13'PR
Mill (Silvertone) w/2-Mounting-Bolts (Back) :
LARGE
2"wide
(If possible, Provide an Image of yours via email, to assure
accuracy)
U-Pitch-Adjustment BRACKET #15128-STANDARD
OR #15138-LARGE
U-PITCH-Bracket for
5'3 to 10'3 PR
STANDARD
(Check ARM-Extrusion-length)
Large U-PITCH-Bracket for 11'6 to 13'PR
OR 10'3-LG
(Check-ARM-Extrusion-length)
NOTE: By
MEASURING The Front And Back Arm-Extrusions, HD Or Standard Can
Be Determined.
Note: *All Alpha Parts Ship To USA-Street Addresses Only...
All
PARTS Are Special-Order,
Allow up-to-10-business-days before shipping.
CHECKING ARM Extrusion Lengths :
B=Back F=Front in Inches
#15105-Std
- Lateral-Arm for 5ft3/pr
(B=30" F=23") #15107-Std - Lateral-Arm
for 7ft/pr (B=40" F=33")
#15108-Std -
Lateral-Arm
for 8ft6/pr
(B=50" F=42.5")
#15110-Std - Lateral-Arm for 10ft3/pr (B=60" F=52") HD
(Larger Parts) #15110-HD - Lateral-Arm for 10ft3/pr
(HD: B=59" F=50")
#15111-HD - Arm for 11ft-6"/pr
(B=68" F=60") #15113-HD - Lateral-Arm for 13ft/pr
(B=76" F=68")
CLICK : To View Image Larger (To Identify Extrusions/Parts)
^ CLICK IMAGE To View LARGER Above ^ ^ ^ Or RIGHT-Click
to Open To New-TAB ^ ^
Note: *This Item Ships To USA-Street Addresses Only...
Select
Color (if applicable),
Then "ADD To Cart"... Type Quantity & Click Update
NOTE: Please Call First, Before Ordering These Items to assure
accuracy...
All PARTS Are
Special-Order so Allow up to 10-business-days before shipping.
* These Parts
are For
ALPHA / Continental / Sun-Tamer Lateral-Arm Retractable Awning systems...
~ Please Be Sure of the items before ordering, since
all sales are final. ~
*NOTE:
These
Parts Are for Alpha Continental Sun-Tamer Awnings and
may not fit different brands...
* NOTE: The Actual
Colors May Vary From Those Viewed On The Screen...
Different Computers and Settings,
Monitors, Flat-Screens, Lap Tops, and Processors May Depict Colors
Differently, as I'm sure most of you have
concluded... Our Listings are for those familiar with these product lines and
the colors... Please Be Sure you know what you are ordering, since
All Sales Are Final... Thanks, Dave:o)
*PRICING BELOW... (Verify Number With Image
above)
For attaching Roller and Square-Tubes
: 
For
attaching ROLLER-Tube Ends To Gear or Rotation-Side.
#14393 END-CAPS PVC For
Front-Bar-Val : As noted
WALL Mounting BRACKETS Mill Finish (Silver-tone)
:
