BENCH PM-5 SNAP & GROMMET MACHINE This sturdy machine
will set self-piercing grommets. Also accommodates fasteners with a separate set of dies. Has a deeper throat and longer
padded handle. Approximate height once bolted to a workbench is 12
this machine must be bolted to the bench, it is not portable. If you require a portable machine, use the aluminum machine
Dies Sold Separately, Below.
PM5 BENCH Machine
For Portable Use)
PM-5 Portable SNAP & GROMMET MACHINE A lightweight
aluminum version of the PM5 machine. Will work
with all the same dies for snaps or our full line of self-piercing grommets. Suitable for portable use. Has a deeper
throat and longer padded handle.
Approximate height is
Dies Sold Separately, Below. PM5 Lightweight-ALUMINUM Machine
DIES . . .
for PM-5 machines
(Fastener DIE-Set below...
Grommet DIES . . .
For above PM-5 MACHINE USE
With PM-5 Machines: Setting Dies for Self-Piercing Grommets... 2
piece set. Each grommet size requires its own die set. Place Self-Piercing Grommet on Top and Washer on Bottom...
For Either PM-5 Machine (Above) use Self-Piercing Grommets
DIES For PM-5
DIES For PM-5
(For above Dies and PM-5 Machines) SELF-PIERCING
GROMMETS > for PM5,
QUANTITY & Update
DIES . . . For DOT Durable and Dura-Snap fasteners (For
PM-5 Machines use)
For DOT and DURA-SNAP Fasteners
(use with PM-1 or PM-5
DOT Durable and Dura Snaps 4-piece-Set
(NOT for Baby
Dura Snap; NOT for Pull-the-dot)
SIZING CHART: Size-Number
= HOLE-Diameter SIZE #00=3/16"Hole-Diameter#0=1/4"Hole #1=9/32"Hole #2=3/8"Hole<<Most Popular#3=7/16"Hole #4=1/2"Hole #5=5/8"Hole
Available By Phone: #6=3/4"Hole #7=29/32"Hole #8=13/16"Hole
Items Ship from USA Or Canada (Based on Your location)
The ITEM Wanted & Then Click "Add To Cart"
2. Place QUANTITY,
& Click UPDATE (See Minimums, If Applicable)
Select "Check-Out", Or "Continue Shopping"
~ It Will Remember What You
Have Already Selected Until Done ~
3. Once Done Shopping,
Select "View Cart" and "Check Out"
That Easy... Thanks!